ONGOING PROJECTS

 

Design, manufacture and development of a cold spray additive manufacturing system for applications in the manufacture of highly engineered parts

Gedikli H. (Executive), Alemdağ Y., Pürçek G., Sofuoğlu H., Öztürk B., Bacaksiz E., et al.

Project Supported by Higher Education Institutions, 2021 - 2024

Projects > Higher Education Institutions Supported Project

 

Manufacturing of Cold Spray Additive Manufacturing System and Development for Applications for Advanced Engineered Part Manufacturing

Gedikli H. (Executive), Sofuoğlu H., Pürçek G., Cora Ö. N., Meriç D., Budur A. İ., et al.

Project Supported by Higher Education Institutions, 2021 - 2024

Projects > Higher Education Institutions Supported Project

 

Comparative Investigation of Structural Mechanical Tribological Properties of AlSi10Mg Automotive Alloy Produced by Traditional and Innovative Manufacturing Methods

Varol T. (Principal Investigator), Alemdağ Y., Pürçek G., Çanakçı A., Aksa H. C., Yanar H., et al.

Project Supported by Higher Education Institutions, 2022 - 2024

Projects > Higher Education Institutions Supported Project

 

Investigation of the Effect of Layered Boron Coating Process on the Mechanical and Tribological Properties of Barrel Steels

ALEMDAĞ Y. (Principal Investigator), KARABIYIK S., PÜRÇEK G.

Project Supported by Higher Education Institutions, 2022 - Ongoing

Projects > Higher Education Institutions Supported Project

 

Development of a New Pad Test System for Road and Rail Vehicles

Yanar H., Pürçek G. (Executive)

TÜBİTAK Project, 2020 - 2021 

TÜBİTAK Project > Projects

 

Laminar Flow and Heat Transfer of Ferrofluid in a Cylindrical Tube Under Variable Magnetic Field: Phase Angle Effect

Bali T., Yağcı E. (Executive), Aydın O.

TÜBİTAK Project, 2022 - 2023

TÜBİTAK Project > Projects

 

Determination of Three-Way Periodic Minimally Surface Cell Architectures and Creation of Gradient Porous Structures for the Design of Prostheses Suitable for the Reconstruction of Lower Jawbone Defects

Karaman D. (Executive), Çuvalcı O.

TÜBİTAK Project, 2023 - 2024

TÜBİTAK Project > Projects

 

Production of continuous fiber reinforced thermoplastic composite material with high mechanical properties with three-dimensional printer technology based on melt deposition method

Customs R. (Executive), Cora O. N., Aslan M., Şimşek C.

TÜBİTAK Project, 2021 - 2023

TÜBİTAK Project > Projects

 

Increasing the life of the parts by analyzing the damages encountered in the barrel lock, irca spring, casing and front sight parts for light commercial weapons and optimization studies

Melhem T., Gedikli H. (Principal Investigator), Meriç D., Erdem A. F., Akgünoğlu A.

Project Supported by Higher Education Institutions, 2022 - 2023

Projects > Higher Education Institutions Supported Project

 

Experimental and numerical investigation of a vertical axis wind turbine with a nature-inspired wavy blade

Sarıoğlu M. (Principal Investigator), Kahveci H., Es H. A., Fırat E., Akansu Y. E., Seyhan M.

TÜBİTAK Project, 2022 - 2024 

TÜBİTAK Project > Projects

 

Investigation of the Effect of Production Parameters of Continuous Fiber Reinforced Thermoplastic Composites on the Fatigue Behavior of Materials

GÜMRÜK R. (Executive), ÇUVALCI H., CORA Ö. N., VAROL T., ASLAN M., UZUNALİ U. Y., et al.

Project Supported by Higher Education Institutions, 2021 - Ongoing

Projects > Higher Education Institutions Supported Project

 

RENEWABLE ENERGY SUPPORTED DRYING SYSTEM DESIGN THAT PROVIDES NATURAL DRYING CONDITIONS OF PRODUCTS GROWN IN THE BLACK SEA REGION

DEMİRTAŞ C. (Principal Investigator), SARAÇ B., KAYGUSUZ K., DEMİRTAŞ Ö. F., AYHAN T., ÖKSÜZ Ö., ET AL.

Project Supported by Higher Education Institutions, 2022 - Ongoing

Projects > Higher Education Institutions Supported Project

 

Hazelnut Drying Machine Working with Infrared Method

HACIOĞLU G. (Principal Investigator), AKTOĞAN A., SESLİ E., DEMİRTAŞ C., KOLCUOĞLU Y.

Project Supported by Higher Education Institutions, 2022 - Ongoing

Projects > Higher Education Institutions Supported Project

 

INVESTIGATION OF PHYSICAL COMFORT CONDITIONS IN PRIMARY SCHOOL BUILDINGS IN TRABZON

ENGİN N. (Principal Investigator), MAÇKA KALFA S., KAVRAZ M., VURAL N., AYDIN Ö., YILMAZ S., et al.

Project Supported by Higher Education Institutions, 2022 - Ongoing

Projects > Higher Education Institutions Supported Project

 

Production and Characterization of New Generation Functional Composite Armor Plates with High Ballistic Resistance and Radiation Absorbing Properties

Çanakçı A. (Principal Investigator), Çuvalcı H., Gedikli H., Yılmaz A. H., Varol T., Erdemir F., et al.

Project Supported by Higher Education Institutions, 2022 - 2025

Projects > Higher Education Institutions Supported Project

 

Increasing the life of the parts by analyzing the damages encountered in the barrel lock, irca spring, casing and front sight parts for light commercial weapons and optimization studies

GEDIKLI H. (Principal Investigator), MERİÇ D., MELHEM T., AKGÜNOĞLU A., ERDEM A. F.

Project Supported by Higher Education Institutions, 2022 - Ongoing

Projects > Higher Education Institutions Supported Project

 

Additive Manufacturing of Particle Doped Thermoplastic Composite Parts Under Vacuum

Customs R. (Executive)

Project Supported by Other Private Institutions, 2022 - 2023

Projects > Supported by Other Private Institutions

 

Investigation of the Jet Stream Impinging on Concave Curvilinear Surfaces

ÖZTEKİN KULOĞLU E. (Principal Investigator), AVCI M.

TÜBİTAK Project, 2015 - Ongoing

TÜBİTAK Project > Projects

 

Investigation of Fatigue Behavior of Al20ZnCu Alloy Produced by Co-Channel Angular Extrusion (EKAE) Method

Aydın M. (Principal Investigator), Heyal Y.

Project Supported by Higher Education Institutions, 2021 - 2023

Projects > Higher Education Institutions Supported Project

 

Experimental Investigation of Flat Plate Closed Loop Pulsed Heat Pipes with Variable Channel Width

HUNTER M.

TÜBİTAK Project, 2018 - Ongoing

TÜBİTAK Project > Projects

 

The use of friction mixing in the development of high-strength and lightweighted automobile body components with very fine grain structure: Deformation behavior, structural and mechanical properties

PÜRÇEK G.

TÜBİTAK Project, 2015 - Ongoing

TÜBİTAK Project > Projects

 

Production of high-strength continuous fiber reinforced thermoplastic composites using a three-dimensional printer

Customs R. (Executive), Usun A.

Project Supported by Higher Education Institutions, 2020 - 2022

Projects > Higher Education Institutions Supported Project

 

Design and production of teaching materials in different disciplines with 3D printer filament from recycled plastics

ASLAN M. (Executive), ÇUVALCI H., SAVAŞKAN YILMAZ S., ALVER U., TEMİZ A., GÜMRÜK R., ET AL.

Project Supported by Higher Education Institutions, 2022 - Ongoing

Projects > Higher Education Institutions Supported Project

 

PREVENTION OF CARBON MONOXIDE POISONING PROJECT

DEMİRTAŞ C.

Project Supported by Other Official Institutions, 2014 - Ongoing

Projects > Projects Supported by Other Official Institutions

 

Joining Ti-Al Laminated Metal Composites Produced by Ultrasonic Bonding with Aluminum Alloys with the Help of Solid State Welding: Investigation of Mechanical and Corrosion Properties and Bond Strength Against Laser Shocks

Cora Ö. N. (Principal Investigator), Acar D., Klob?aroc D. (Principal Investigator), Trdan U.

TÜBİTAK International Bilateral Cooperation Project, 2022 - 2024

TÜBİTAK International Bilateral Cooperation Project > Projects

 

AUTOMATICALLY CONTROLLED FIN BLADE SYSTEM MADE OF HEMP REINFORCED COMPOSITE, INTEGRATED WITH DYNAMIC TRIM AND STABILITY CONTROL SYSTEM

Sancak C., Şahin Ö. S.(Executive), Peşman E., Aslan M., Çıcı F., Kahramanoğlu E.

TÜBİTAK Project, 2022 - 2025 

TÜBİTAK Project > Projects

 

DEVELOPMENT OF INNOVATIVE LIGHTWEIGHT WEAPON TECHNOLOGIES AND TRAINING OF QUALIFIED RESEARCHERS IN THIS FIELD

OKAN O. T. (Principal Investigator), VAROL T. (Principal Investigator), CORA Ö. N.

TÜBİTAK Project, 2020 - Ongoing

TÜBİTAK Project > Projects

 

Investigation of the Fatigue Behavior of Al20ZnCu Alloy Produced by Angular Extrusion EKAE Method in Co-Channel

AYDIN M. (Principal Investigator), HEYAL Y.

Project Supported by Higher Education Institutions, 2021 - Ongoing

Projects > Higher Education Institutions Supported Project

 

COMPLETED PROJECTS

 

Production of Biomedical and Advanced Engineering Materials by Selective Laser Melting Method

VAROL T. (Executive), ÇUVALCI H., BAYKAL S., DURAN C., ÇANAKÇI A., SARI A., et al.

Project Supported by Higher Education Institutions, 2020 - 2023

Projects > Higher Education Institutions Supported Project

 

EXPERIMENTAL AND NUMERICAL INVESTIGATION OF DAMAGE TO WEAR SHIELD UNDER LOW ENERGY COLLISION (TAI/DKTM)

Gedikli H. (Executive), Sofuoğlu H., Cora Ö. N., Gümrük R., Meriç D., Özen İ., et al.

Project Supported by Other Official Institutions, 2015 - 2017 

Projects > Projects Supported by Other Official Institutions

 

The Effect of ZrN Coating Formed with Different Interlayers on the Impact Wear Performance of Untreated and Nitrided 12367 Hot Work Tool Steel

Kahramanzade H. (Principal Investigator), Küçükömeroğlu T., Sert Y., Karaman D.

Project Supported by Higher Education Institutions, 2022 - 2023 

Projects > Higher Education Institutions Supported Project

 

Fuel Cell Test System Installation

AYDIN Ö. (Principal Investigator), CORA Ö. N., VAROL T., ÇUHADAROĞLU B., BALI T.

Project Supported by Higher Education Institutions, 2021 - 2023

Projects > Higher Education Institutions Supported Project

 

Investigation of Optimum Geometry and Operating Parameters in Electronic Air Cooling

Aydın O. (Executive), Avcı M.

TÜBİTAK Project, 2014 - 2017

TÜBİTAK Project > Projects

 

INVESTIGATION OF MECHANICAL AND BALLISTIC PROPERTIES OF BRAIDED FIBER REINFORCED COMPOSITE STRUCTURES

GEDIKLI H. (Principal Investigator), MERİÇ D., BUDUR A. İ., CORA Ö. N., ÖZEN İ., ACAR D., et al.

Project Supported by Higher Education Institutions, 2016 - 2018

Projects > Higher Education Institutions Supported Project

 

5th International Anatolian Energy Symposium

ÇUHADAROĞLU B. (Principal Investigator), SAĞLAM M., COŞKUN M. Y., KAN F. E.

Project Supported by Higher Education Institutions, 2019 - 2021

Projects > Higher Education Institutions Supported Project

 

Thermal control of portable electronic devices Thermal control unit and sheath design with FDM addition

BALİ T. (Executive), YAZICI M. Y., AYDIN O., SAĞLAM M., AVCI M.

Project Supported by Higher Education Institutions, 2017 - 2020

Projects > Higher Education Institutions Supported Project

 

Investigation of the Effect of Friction Mixing Process on the Mechanical and Tribological Properties of AlSi10Mg Alloy Produced by Additive Manufacturing Method

KAHRAMANZADE H. (Principal Investigator), KÜÇÜKÖMEROĞLU T., SERT Y.

Project Supported by Higher Education Institutions, 2020 - 2021

Projects > Higher Education Institutions Supported Project

 

The Effect of AlCrN and AlCrTiN Coatings on the Wear Behavior of Different Mold Steels

Küçükömeroğlu T. (Executive), Kahramanzade H., Sert Y., Göz O., Türküz C.

Project Supported by Higher Education Institutions, 2022 - 2023 

Projects > Higher Education Institutions Supported Project

 

Manufacturing and Performance Tests of Ceramic Fuel Cells

AYDIN Ö. (Principal Investigator), BALİ T., ÇUHADAROĞLU B.

Project Supported by Higher Education Institutions, 2022 - 2024

Projects > Higher Education Institutions Supported Project

 

Establishment of Electric and Hydromobile Vehicle Development Laboratory

BİLGİN A. (Principal Investigator), OKUMUŞ H. İ., ASLAN M., KAHVECİ H., BAYRAKTAR H., ŞAHİN Z.

Project Supported by Higher Education Institutions, 2015 - 2015

Projects > Higher Education Institutions Supported Project

 

Investigation of the Effect of a Thermomechanical Process Including Versatile Forging and Aging Processes on the Mechanical and Tribological Properties of Aluminum-Zinc Based Bearing Material

ALEMDAĞ Y. (Principal Investigator), PÜRÇEK G., KARABIYIK S., UZUN M.

Project Supported by Higher Education Institutions, 2021 - 2023

Projects > Higher Education Institutions Supported Project

 

Investigation of the Effects of Multidirectional Forging Method on the Mechanical and Tribological Properties of Al-12Si-3Cu-Mn Alloys

Alemdağ Y. (Principal Investigator), Pürçek G., Karabıyık S.

TÜBİTAK Project, 2020 - 2021

TÜBİTAK Project > Projects

 

The Effects of Nitride-Based Coatings Applied to Cold Forged Mold Elements on the Wear Behavior of the Mold

Küçükömeroğlu T. (Principal Investigator), Kahramanzade H., Sert Y.

Project Supported by Higher Education Institutions, 2022 - 2022

Projects > Higher Education Institutions Supported Project

 

Investigation of Structural and Mechanical Properties of Nanostructured Copper Produced by Different Extreme Plastic Deformation Methods

PÜRÇEK G. (Principal Investigator), KÜÇÜKÖMEROĞLU T.

TÜBİTAK Project, 2009 - 2011 

TÜBİTAK Project > Projects

 

Development of a Servo System Driven and PLC Controlled Friction Wear and Lubrication Tester with Interface Software

Yanar H. (Executive), Pürçek G.

KOSGEB, 2019 - 2020 

Projects > KOSGEB

 

Cooling of photovoltaic panels with air- and phase-change media-supported systems

Yağcı O. K. (Executive), Markal B., Aydın O.

TÜBİTAK Project, 2021 - 2023 

TÜBİTAK Project > Projects

 

Laminar Flow and Heat Transfer of Ferrofluid in a Cylindrical Tube Under Constant Magnetic Field The Effect of Variable Directional Electromagnet Array on Flow Media

BALİ T. (Principal Investigator), AYDIN O., YAĞCI E.

Project Supported by Higher Education Institutions, 2023 - 2024

Projects > Higher Education Institutions Supported Project

 

Experimental Investigation of Heat Transfer and System Parameters in Boiling in Microchannel Flows

Aydın O. (Executive), Avcı M.

TÜBİTAK Project, 2013 - 2016

TÜBİTAK Project > Projects

 

Development of a unique multifunctional tribological testing system

Pürçek G. (Executive), Çakır O.

TÜBİTAK Project, 2017 - 2019

TÜBİTAK Project > Projects

 

Synthesis of Graduated Tialcrnbn Film Coated on Nitrided H13 Steel for High Temperature Applications and Investigation of Mechanical Tribological Properties

Küçükömeroğlu T. (Principal Investigator)

TÜBİTAK Project, 2016 - 2019

TÜBİTAK Project > Projects

 

Study of the interaction of sequentially produced synthetic jets with different amplitude and frequency

Sarıoğlu M., Akansu Y. E.(Principal Investigator)

TÜBİTAK Project, 2016 - 2018

TÜBİTAK Project > Projects

 

Three-layer conjugated electro-active polymer actuator production, characterization and inspection

Gedikli E., İtik M. (Executive)

TÜBİTAK Project, 2014 - 2017

TÜBİTAK Project > Projects

 

Improving the Positioning Performance of a Cable-Driven Manipulator

İTİK M. (EXECUTIVE), SANCAK C.

Project Supported by Higher Education Institutions, 2018 - 2020

Projects > Higher Education Institutions Supported Project

 

Development of high-performance Cu-Cr-Zr electrode material with the combined effect of extreme plastic deformation and aging processes and creation of a semi-finished pilot production system for it

Pürçek G. (Principal Investigator)

Industrial Theses Project, 2013 - 2015 

Projects > Industrial Theses Project

 

Increasing the commercialization potential by developing the pin-on-disc type tribological test system in a modular manner

Yanar H. (Executive), Pürçek G.

TÜBİTAK Project, 2015 - 2016

TÜBİTAK Project > Projects

 

Investigation of Wear Behavior of Cylinder Liner Material Coated with CrN and AlCrN

Sert Y., Aktarer S. M. (Executive), Küçükömeroğlu T.

Project Supported by Higher Education Institutions, 2020 - 2021 

Projects > Higher Education Institutions Supported Project

 

Investigation of the Effect of Increasing Decreasing Amplitude Modulation on Aircraft Wing Performance with Offensive and Trailing Edge Wavy Geometry

Sarıoglu M. (Principal Investigator), Akansu Y. E.

TÜBİTAK Project, 2018 - 2021

TÜBİTAK Project > Projects

 

Establishment and Development of Design and Production Processes for Medical Product Development

ASLAN M. (Principal Investigator), GEDIKLİ H., AYDEMİR Ö., KORKMAZ Y. T., TÜZÜNER T., YAZAR U., et al.

Project Supported by Higher Education Institutions, 2019 - 2021

Projects > Higher Education Institutions Supported Project

 

INVESTIGATION OF THE EFFECTS OF TEMPERATURE, LIQUID PRESSURE and PRESSURE PLATE FORCE ON THE PROCESS AND MANUFACTURED PARTS IN WARM HYDROMECHANICAL DEEP DRAWING

Gedikli H., Cora Ö. N., Halkacı H. S. (Executive)

TÜBİTAK Project, 2012 - 2015

TÜBİTAK Project > Projects

 

Production of Nanostructured Zn-Al-Based Alloys in Balk Form by Extreme Plastic Deformation: Structural, Mechanical and Tribological Properties

PÜRÇEK G. (Principal Investigator), KÜÇÜKÖMEROĞLU T.

TÜBİTAK Project, 2005 - 2008

" data-original-title="" data-placement="top" data-title="Sustainable Development" data-toggle="popover" title=""> 

TÜBİTAK Project > Projects

 

PRODUCTION AND INVESTIGATION OF THE PROPERTIES OF FUNCTIONALLY GRADED HYBRID NANOCOMPOSITE MATERIALS FOR ARMORED VESTS

ALVER U. (Principal Investigator), DUMAN M. S., ÇUVALCI H., ÇANAKÇI A., ASLAN M., AKPINAR M. V., et al.

Project Supported by Higher Education Institutions, 2015 - 2016

Projects > Higher Education Institutions Supported Project

 

Development of composite brake pad composition for railway vehicles

PÜRÇEK G. (Principal Investigator), DEMİRTAŞ M., YANAR H.

Project Supported by Higher Education Institutions, 2018 - 2022

Projects > Higher Education Institutions Supported Project

 

Experimental investigation of the design, manufacture and performance of a horizontal axis wind turbine with a Nature-Inspired Wavy Wing Profile

SARIOĞLU M. (Principal Investigator), ÇOLAK A., SEYHAN M., DEMİRCİ V.

Project Supported by Higher Education Institutions, 2022 - 2024

Projects > Higher Education Institutions Supported Project

 

Production of Ultra-Crystalline Structure and High Strength IF-Steel by Co-Channel Angular Extrusion Method and Application of This Method to Sheets Produced from IF-Steel

PÜRÇEK G. (Principal Investigator), KÜÇÜKÖMEROĞLU T.

TÜBİTAK Project, 2008 - 2011

TÜBİTAK Project > Projects

 

National Boron Research Institute (BOREN): Investigation of the Effect of Boron (Boron Nitride) Use on Tribological Properties in Non-Asbestos Composite Brake Shoes

Yanar H., Pürçek G.

BOREN, National Boron Research Institute Project, 2014 - 2016

Projects > BOREN, National Boron Research Institute Project

 

Development of coating layer to increase the service life of the hot forging die

Küçükömeroğlu T. (Principal Investigator)

TÜBİTAK Project, 2020 - 2022

TÜBİTAK Project > Projects

 

Investigation of the Effect of In-Barrel Hard Chrome Plating on Barrel Properties and Firing Performance

VAROL T. (Principal Investigator), PÜRÇEK G., YANAR H., AKÇAY S. B., YILDIZ U. T.

Project Supported by Higher Education Institutions, 2022 - 2024

Projects > Higher Education Institutions Supported Project

 

A Heat Storage System with Phase Change Agent Addition

BALİ T. (Executive), YAZICI M. Y., AYDIN O., AVCI M.

Project Supported by Higher Education Institutions, 2018 - 2020

Projects > Higher Education Institutions Supported Project

 

Investigation of Locked and Unlocked Plate Fixation Systems Used in the Treatment of Tibial Fractures in Different Positions

Kahramanzade H. (Principal Investigator), Orhan O., Çam S.

Project Supported by Higher Education Institutions, 2017 - 2019

Projects > Higher Education Institutions Supported Project

 

Design and manufacture of a multi-purpose friction and wear testing system

YANAR H. (Executive)

Project Supported by Other Official Institutions, 2013 - 2014 

Projects > Projects Supported by Other Official Institutions

 

Investigation of Galling Resistance in OCTG Connections

HE'S THE SACKMAN.

Other International Fund Programs, 1989 - 1989

Projects > Other International Funding Programs

 

Design, Manufacturing and Performance Characteristics of the Prototype of the Vacuum System to be Used in Fresh Tea Transportation in Tea Factories,

Chief H. (Executive)

Industrial Theses Project, 2007 - 2009

Projects > Industrial Theses Project

 

Production and Performance Evaluations of Metallic Interconnector Plates Used in Solid Oxide Fuel Cells (SOCP) by Powder Metallurgy (T/M) Method

ÖZTÜRK B. (Principal Investigator), CORA Ö. N.

TÜBİTAK Project, 2014 - 2017

TÜBİTAK Project > Projects

 

High Performance Diffusive Reflector Manufacturing

Customs R. (Executive), Usun A., Kuleyin H.

TÜBİTAK Project, 2018 - 2019

TÜBİTAK Project > Projects

 

Experimental and theoretical investigation of the effects of fuel fumigation and mechanical losses in vehicle diesel engines

SAHIN Z.

CB Presidency of Strategy and Budget (Ministry of Development) Project, 2005 - 2009

Projects > CB Strategy and Budget Directorate (Ministry of Development) Project

 

IN-VITRO EVALUATION OF ANTIBACTERIAL, CYTOTOXIC, PHYSICAL AND CHEMICAL PROPERTIES OF GLASS IONOMER CEMENT CONTAINING CHLORHEXIDINE BENZALKONIUM CHLORIDE AND PROPOLIS

TÜZÜNER T. (Principal Investigator), PÜRÇEK G., SÖKMEN M., ÇAKIROĞLU T. N., ALTINTEPE İ., KUŞGÖZ A., et al.

Project Supported by Higher Education Institutions, 2015 - 2016

Projects > Higher Education Institutions Supported Project

 

Effect of Copper Doped on Fatigue Behavior of Al-20Zn Alloy

AYDIN M. (Principal Investigator), HEYAL Y.

Project Supported by Higher Education Institutions, 2017 - 2019

Projects > Higher Education Institutions Supported Project

 

INVESTIGATION OF STRUCTURAL AND TRIBOLOGIC PROPERTIES OF SURFACE COATINGS FOR HIGH TEMPERATURE APPLICATIONS

KÜÇÜKÖMEROĞLU T. (Principal Investigator)

Project Supported by Higher Education Institutions, 2014 - 2015

Projects > Higher Education Institutions Supported Project

 

Stress analysis of human bone by modeling with finite element method

SOFUOĞLU H. (Principal Investigator)

Project Supported by Higher Education Institutions, 2006 - 2018

Projects > Higher Education Institutions Supported Project

 

INCREASING THE EFFICIENCY OF SOLAR PANELS (PV) BY COOLING

DEMİRTAŞ C. (Principal Investigator), AKSOY S., AKSOY M. S.

Project Supported by Higher Education Institutions, 2017 - 2018

Projects > Higher Education Institutions Supported Project

 

Investigation of the Effect of Different Irrigation Systems on Root Canal Past, Dentin Tubule Penetration and Push-Out Bonding Strength

KOŞAR T. (Principal Investigator), ONAT M. D., CELIK D., PÜRÇEK G.

Project Supported by Higher Education Institutions, 2021 - 2022

Projects > Higher Education Institutions Supported Project

 

Improvement of the superplastic behavior of Zn-22Al alloy at room temperature and investigation of its usability as a damping material

PÜRÇEK G. (Principal Investigator)

Project Supported by Higher Education Institutions, 2014 - 2017

Projects > Higher Education Institutions Supported Project

 

Boronizing mixture for solid-state boronization of titanium and its alloys

KARA G. (Principal Investigator), PÜRÇEK G.

Project Supported by Higher Education Institutions, 2017 - 2020

Projects > Higher Education Institutions Supported Project

 

EXPERIMENTAL AND INVESTIGATION OF THE EFFECTS OF ADDING WATER TO THE INTAKE AIR IN GASOLINE ENGINES ON ENGINE PERFORMANCE AND EXHAUST EMISSIONS

ŞAHİN Z. (Executive)

Project Supported by Higher Education Institutions, 2012 - 2019

Projects > Higher Education Institutions Supported Project

 

Chamber geometry optimization in latent heat storage with phase-change media

AVCI M. (Executive)

Project Supported by Higher Education Institutions, 2011 - 2013

Projects > Higher Education Institutions Supported Project

 

The Effect of Hardening Process on Pistol Covers

KÜÇÜKÖMEROĞLU T. (Principal Investigator), KARSLI M.

Project Supported by Higher Education Institutions, 2020 - 2021

Projects > Higher Education Institutions Supported Project

 

Applications of Solid Modeling and Simulation Techniques in Education

ÇUVALCI O. (Executive)

Project Supported by Higher Education Institutions, 2014 - 2014

Projects > Higher Education Institutions Supported Project

 

Dump Truck Hydraulics Package Design Review

HE'S THE SACKMAN.

Other International Fund Programs, 1998 - 1999

Projects > Other International Funding Programs

 

Optimisation of the lap length of single-effect trapping joints created using doped adhesive

Kahramanzade H. (Principal Investigator), Orhan O., Çam S.

Project Supported by Higher Education Institutions, 2017 - 2018

Projects > Higher Education Institutions Supported Project

 

Development of a Screening Test for Thread Compounds to Resist Galling

HE'S THE SACKMAN.

Other International Fund Programs, 1991 - 1991

Projects > Other International Funding Programs

 

Design and Processing Characteristics of Novel Three Dimensional Fibrous Preforms for Composite Reinforcement

GÜMÜŞEL L. (Principal Investigator)

Other International Fund Programs, 2004 - 2007

Projects > Other International Funding Programs

 

I Get My Energy From Nature

HUNTER M.

TÜBİTAK Project, 2018 - 2019

TÜBİTAK Project > Projects

 

Determination of Nonlinear Friction Characteristic of Titanium Tubing with Various Thread Compound," sponsored by Exxon Production Research Company ($13,000), June 1991 - September 1991.

HE'S THE SACKMAN.

Other International Fund Programs, 1991 - 1991

Projects > Other International Funding Programs

 

5. Investigation of Optimum Magnetic Properties of Hts Group Bulk Superconductors for Maglev Train Applications by Experimental and Numerical Methods

GEDIKLİ H., Öztürk K. (Principal Investigator)

EU Framework Programmes Funded Project, 2012 - 2014

Projects > EU Framework Programmes Supported Project

 

Use of Adapted Gyroscope as a Vibration Damper in Structures

ÇUVALCI O. (Executive)

TÜBİTAK Project, 2014 - 2017

TÜBİTAK Project > Projects

 

(6) Quantitative and Experimental Investigation of Jet Streams, DPT Project

BAYDAR E. (Principal Investigator)

CB Strategy and Budget Directorate (Ministry of Development) Project, 2003 - 2007

Projects > CB Strategy and Budget Directorate (Ministry of Development) Project

 

Experimental Investigation of Flat Plate Closed Loop Pulsed Heat Pipes with Variable Channel Width

Markal B. (Principal Investigator), Hunter M.

TÜBİTAK Project, 2018 - 2020

TÜBİTAK Project > Projects

 

Production of Metal Oxide Based Contact Material and Investigation of Its Properties

Aydın M. (Executive), Bıyık S.

Project Supported by Higher Education Institutions, 2011 - 2014

Projects > Higher Education Institutions Supported Project

 

Development of Surface Coating Layer for Hot Forging Molds

KÜÇÜKÖMEROĞLU T. (Principal Investigator), SERT Y.

Project Supported by Higher Education Institutions, 2019 - 2023

Projects > Higher Education Institutions Supported Project

 

The Use of Boric Acid as an Additive Engine Oil and Investigation of Its Effects on Engine Performance

HEAD H. (Executive)

Project Supported by Higher Education Institutions, 2009 - 2018

Projects > Higher Education Institutions Supported Project

 

Reduction of drag force acting on vehicles by flow control methods

SARIOĞLU M. (Principal Investigator)

Project Supported by Higher Education Institutions, 2008 - 2018

Projects > Higher Education Institutions Supported Project

 

Production of Nanostructured and High Strength Pure Titanium for Biomaterial Applications: Investigation of Structural Mechanical and Tribological Properties

PÜRÇEK G. (Principal Investigator)

Project Supported by Higher Education Institutions, 2010 - 2012

Projects > Higher Education Institutions Supported Project

 

Investigation of Tribological Properties of 100 Cr6 Steel Coated with Thin Films in Various Media

KÜÇÜKÖMEROĞLU T. (Principal Investigator)

Project Supported by Higher Education Institutions, 2009 - 2011

Projects > Higher Education Institutions Supported Project

 

Investigation of Joinability of Dual Phase Steels (DP600-800) by Friction Stir Welding Method

KÜÇÜKÖMEROĞLU T. (Principal Investigator), AKTARER S. M.

Project Supported by Higher Education Institutions, 2016 - 2018

Projects > Higher Education Institutions Supported Project

 

Creation of an Injury Model for the Human Head and Neck System by Finite Element Method

SOFUOĞLU H. (Principal Investigator)

Project Supported by Higher Education Institutions, 2009 - 2018

Projects > Higher Education Institutions Supported Project

 

Determination of Performance Parameters and Exhaust Emissions of Current Vehicle Engines and Use of Alternative Fuels and Water in Engines

ŞAHİN Z. (Principal Investigator), AKSU O. N., BAYRAM C.

Project Supported by Higher Education Institutions, 2015 - 2017

Projects > Higher Education Institutions Supported Project

 

Calculation of Thermal Stresses in Ammonia-Powered Ceramic Fuel Cells

AYDIN Ö. (Principal Investigator)

Project Supported by Higher Education Institutions, 2022 - 2023

Projects > Higher Education Institutions Supported Project

 

Determination and Modeling of Mechanical Properties of Materials by Micro7Nano-Penetration Method, Nanopenetration Tester Design and Manufacturing

CORA Ö. N. (Principal Investigator)

Project Supported by Higher Education Institutions, 2011 - 2019

Projects > Higher Education Institutions Supported Project

 

Evaluation of Roadway Lighting Systems Designed by Small Target Visibility (STV)", Texas Department of Transportation, Traffic Operation

HE'S THE SACKMAN.

Other International Fund Programs, 1996 - 1999

Projects > Other International Funding Programs

 

Investigation of Optimum Geometry and Operating Parameters in Electronic Air Cooling

Aydın O. (Principal Investigator)

TÜBİTAK Project, 2014 - 2018

TÜBİTAK Project > Projects

 

Development of Surface Coating Layer for Hot Forging Molds

Sert Y., Küçükömeroğlu T.(Principal Investigator)

Project Supported by Higher Education Institutions, 2019 - 2022

Projects > Higher Education Institutions Supported Project

 

Determination of Friction Characteristic of P-110 Tubing with Tin Plating

HE'S THE SACKMAN.

Other International Fund Programs, 1991 - 1991

Projects > Other International Funding Programs

 

Zn-Al Based Layered Plain Bearing Manufacturing for Vehicle Engines

DUMAN M. S., ÇUVALCI H. (Executive)

TÜBİTAK Project, 2006 - 2010

TÜBİTAK Project > Projects

 

Nonlinear Friction Measurement Program,

HE'S THE SACKMAN.

Other International Fund Programs, 1991 - 1991

Projects > Other International Funding Programs

 

Numerical and Experimental Investigation of Jet Streams

OZMEN Y.

CB Presidency of Strategy and Budget (Ministry of Development) Project, 2004 - 2007

Projects > CB Strategy and Budget Directorate (Ministry of Development) Project

 

The Effect of Static and Dynamic Loads and Surface Roughness on Bearing Performance in Radial Plain Bearings

Sofuoğlu H. (Principal Investigator)

Project Supported by Higher Education Institutions, 2003 - 2006

Projects > Higher Education Institutions Supported Project

 

Investigation of fatigue behavior of Zinc, Aluminum-based alloys subjected to excessive plastic deformation

Aydın M. (Principal Investigator), Heyal Y.

Project Supported by Higher Education Institutions, 2008 - 2011

" data-original-title="" data-placement="top" data-title="Sustainable Development" data-toggle="popover" title=""> 

Projects > Higher Education Institutions Supported Project

 

Determination of the geometric characteristics of the flame front in a spark ignition engine with a rooftop pentroof combustion chamber using a solid model program

Bilgin A. (Principal Investigator), Altın İ.

Project Supported by Higher Education Institutions, 2009 - 2010

Projects > Higher Education Institutions Supported Project

 

Production of the lowest viscosity waste frying oil biodiesel, improvement of spray properties, investigation of its effect on engine performance and exhaust emissions

Gülüm M. (Principal Investigator)

TÜBİTAK Project, 2018 - 2019

TÜBİTAK Project > Projects

 

Experimental investigation of the effect of various production parameters on important fuel properties of biodiesel produced from some vegetable oils

Gülüm M., Bilgin A.(Principal Investigator)

Project Supported by Higher Education Institutions, 2013 - 2014

Projects > Higher Education Institutions Supported Project

 

Doped Micro Cellular Composite Printing 3D Printer Extruder

CUSTOMS R. (Executive), UŞUN A.

Project Supported by Higher Education Institutions, 2018 - 2021

Projects > Higher Education Institutions Supported Project

 

Investigation of Impact Behavior of Pressurized Energy Damping Elements

CUSTOMS R. (Executive), KULEYİN H.

Project Supported by Higher Education Institutions, 2018 - 2019

Projects > Higher Education Institutions Supported Project

 

Five-Axis Additive Manufacturing Research Project in Architecture

VURAL S. (Principal Investigator), OKTAN S., COŞKUN M. Y.

Project Supported by Higher Education Institutions, 2022 - 2023

Projects > Higher Education Institutions Supported Project

 

Experimental and Numerical Determination of Energy Damping Characteristics of Tubes Made of Different Materials Under Static and Dynamic Loads

HEAD H. (Executive)

Project Supported by Higher Education Institutions, 2009 - 2012

Projects > Higher Education Institutions Supported Project

 

Determination of Internal Structure Forms of Wall Blocks Containing Phase Change Material (FDM) for Climatic Zones in Turkey

ÇUHADAROĞLU B. (Principal Investigator), HAYDARASLAN E.

Project Supported by Higher Education Institutions, 2021 - 2022

Projects > Higher Education Institutions Supported Project

 

Internal Pressure Bag For Shock Damping Tubes

CUSTOMS R. (Executive), KULEYİN H.

Project Supported by Higher Education Institutions, 2017 - 2021

Projects > Higher Education Institutions Supported Project

 

Evaluation of the wear caused by ultrasonic tips on titanium surfaces coated with titanium nitride or zirconium nitride-based materials

ŞÜKÜROĞLU E. (Principal Investigator), KÜPCÜ Ç., KÜÇÜKÖMEROĞLU T.

Project Supported by Higher Education Institutions, 2021 - 2022

" data-original-title="" data-placement="top" data-title="Sustainable Development" data-toggle="popover" title=""> 

Projects > Higher Education Institutions Supported Project

 

Inspection of Conjugated Electroactive Polymer Actuators

İTİK M. (Executive)

Project Supported by Higher Education Institutions, 2011 - 2017

Projects > Higher Education Institutions Supported Project

 

Production of Polymer Matrix Nano Particle Reinforced Composite Materials and Investigation of Their Optical and Thermal Properties

ALVER U. (Principal Investigator), GÜMÜŞKAYA E., ÇUVALCI H., ASLAN M., GÜLER O., YAZGAN A., et al.

Project Supported by Higher Education Institutions, 2018 - 2020

Projects > Higher Education Institutions Supported Project

 

INVESTIGATION OF THE COMPOSABILITY OF NICKEL ALUMINUM BRONZE ALLOY BY FRICTION STIR WELDING METHOD

KÜÇÜKÖMEROĞLU T. (Principal Investigator)

Project Supported by Higher Education Institutions, 2014 - 2015

Projects > Higher Education Institutions Supported Project

 

Investigation of Heat and Mass Transfer in Hazelnut Roasting Process

BEEKEEPER M. E. (Principal Investigator)

Project Supported by Higher Education Institutions, 2011 - 2011

Projects > Higher Education Institutions Supported Project

 

Determination of the Geometric Characteristics of the Flame Front in a Spark Ignition Engine with a Pentroof Combustion Chamber Using a Solid Model Program

BİLGİN A. (Executive)

Project Supported by Higher Education Institutions, 2009 - 2010

Projects > Higher Education Institutions Supported Project

 

Solder joint Generation and Characterization for Superconducting Magnets operating in Continuous Current Mode

AKSOY C. (Principal Investigator), SAVAŞKAN B., ŞİMŞEK C., TIRAŞOĞLU E., TAYLAN KOPARAN E., ÇAKIR B., et al.

Project Supported by Higher Education Institutions, 2020 - 2022

Projects > Higher Education Institutions Supported Project

 

Investigation of Wear Behavior of Spherical Graphite Cast Irons Produced by Sand Casting Method

AYDIN M. (Principal Investigator)

Project Supported by Higher Education Institutions, 2011 - 2016

" data-original-title="" data-placement="top" data-title="Sustainable Development" data-toggle="popover" title=""> 

Projects > Higher Education Institutions Supported Project

 

Development of Metallic Foam Based and Functional Composite Personnel Armoring Plates by Artificial Neural Network Method

VAROL T. (Principal Investigator), ÇUVALCI H., ÇANAKÇI A., GEDIKLİ H., ERDEMİR F., ÖZKAYA S., et al.

Project Supported by Higher Education Institutions, 2020 - 2022

Projects > Higher Education Institutions Supported Project

 

Production of Mini Plates from Pure Titanium with Increased Strength by Extreme Plastic Deformation Method; Experimental and Theoretic Biomechanical Evaluation

Alsaran A. (Principal Investigator), Kahramanzade H.

Project Supported by Higher Education Institutions, 2013 - 2016 

Projects > Higher Education Institutions Supported Project

 

System Design and Construction of a Cadaver Section Display

HE'S THE SACKMAN.

Other International Fund Programs, 1996 - 1997

Projects > Other International Funding Programs

 

STUDY ON HEAT RECOVERY PROCESS WITHIN ANODE FOR DOWNSIZING FUEL CELL MODULE

Aydın Ö., Shiratori Y. (Principal Investigator)

Project Supported by Public Institutions in Other Countries, 2017 - 2020

Projects > Supported by Public Institutions in Other Countries

 

Investigation of the Design and Performance Features of the Building Exterior Cleaning Robot

Chief H. (Executive)

TÜBİTAK Project, 2008 - 2009

TÜBİTAK Project > Projects

 

Central Research Laboratory

HE'S THE SACKMAN.

CB Presidency of Strategy and Budget (Ministry of Development) Project, 2014 - 2015

Projects > CB Strategy and Budget Directorate (Ministry of Development) Project

 

Imperance deformation analysis of shells

Sofuoğlu H. (Principal Investigator)

Project Supported by Higher Education Institutions, 2002 - 2005

Projects > Higher Education Institutions Supported Project

 

Development of New Zinc-Aluminum Based Bearing Materials and Investigation of Tribological Properties of Bearings Produced from These Materials

ÇUVALCI H., PÜRÇEK G.

TÜBİTAK Project, 1993 - 1995

TÜBİTAK Project > Projects

 

Forging Function Tribology Test Setup Design and Manufacturing

Sert Y., Küçükömeroğlu T.(Principal Investigator)

Project Supported by Higher Education Institutions, 2019 - 2020

Projects > Higher Education Institutions Supported Project

 

Experimental and Numerical Investigation of Pulsating Biological Flows in Microchannels

HUNTER M.

TÜBİTAK Project, 2005 - 2008

TÜBİTAK Project > Projects

 

An Investigation of Galling in OCTG Connections

HE'S THE SACKMAN.

Other International Fund Programs, 1989 - 1989

Projects > Other International Funding Programs

 

Dynamic Trim and Stability Control System

Şahin Ö. S.(Executive), Sancak C., İtik M.

TÜBİTAK Project, 2016 - 2017

TÜBİTAK Project > Projects

 

Improvement of System Dynamics and Control Laboratory Infrastructure

GÜMÜŞEL L. (Principal Investigator)

Project Supported by Higher Education Institutions, 2011 - 2018

Projects > Higher Education Institutions Supported Project

 

In vitro investigation of the effect of different beverages on the hardness and roughness of restorative materials

DÜLGER K. (Principal Investigator), ÇAKMAK İ., PÜRÇEK G.

Project Supported by Higher Education Institutions, 2021 - 2022

" data-original-title="" data-placement="top" data-title="Sustainable Development" data-toggle="popover" title=""> 

Projects > Higher Education Institutions Supported Project

 

Investigation of the Effects of the Use of Diesel Fuel-Biodiesel Fuel Mixtures in Diesel Engines on Combustion Characteristics and Engine Performance

BİLGİN A. (Executive)

Project Supported by Higher Education Institutions, 2012 - 2019

Projects > Higher Education Institutions Supported Project

 

Evaluation of the Effect of Different Medikaman Agents and Coronal Barrier Materials Used in Regenerative Endodontic Treatment on the Fracture Resistance of Artificial Immature Teeth

KOŞAR T. (Principal Investigator), PÜRÇEK G., BAYRAKTAR F., ÇELİK D.

Project Supported by Higher Education Institutions, 2021 - 2022

Projects > Higher Education Institutions Supported Project

 

Experimental Investigation of Mechanical Properties of Magnetoreological Composite Materials

GÜMRÜK R. (Executive), MAZLUM U., AYGÜN C.

Project Supported by Higher Education Institutions, 2016 - 2016

Projects > Higher Education Institutions Supported Project

 

Production of Waste NdFeB Magnet Doped EPDM Based Composite Material and Experimental Determination of Its Inelastic Properties

HEAD H. (Executive)

Project Supported by Higher Education Institutions, 2013 - 2018

Projects > Higher Education Institutions Supported Project

 

Experimental and Numerical Investigation of Friction Coefficient in Forming Processes

GEDIKLI H. (Executive)

Project Supported by Higher Education Institutions, 2011 - 2012

Projects > Higher Education Institutions Supported Project

 

Investigation of Fatigue Behavior of Zinc Aluminum Based Alloys Subjected to Excessive Plastic Deformation

AYDIN M. (Principal Investigator)

Project Supported by Higher Education Institutions, 2009 - 2012

" data-original-title="" data-placement="top" data-title="Sustainable Development" data-toggle="popover" title=""> 

Projects > Higher Education Institutions Supported Project

 

Investigation of the Effect of Laser Surface Patterning Parameters on Tribological Performance of Ultra-High Molecular Weight Polyethylene Surfaces

CORA O. N. (Principal Investigator), ÇAVRAR T.

Project Supported by Higher Education Institutions, 2021 - 2022

Projects > Higher Education Institutions Supported Project

 

Experimental Investigation of the Effects of Adding Water to the Absorbed Air in Diesel Engines on Engine Characteristics and Exhaust Emissions

ŞAHİN Z. (Executive)

Project Supported by Higher Education Institutions, 2011 - 2012

Projects > Higher Education Institutions Supported Project

 

Production of Metal Oxide Based Contact Material and Investigation of Its Properties

AYDIN M. (Principal Investigator)

Project Supported by Higher Education Institutions, 2011 - 2013

Projects > Higher Education Institutions Supported Project

 

Classification of EEG Signals Occurring During Different Tasks and Creating an Infrastructure for Creating a Brain-Computer Interface

GÜMÜŞEL L. (Principal Investigator)

Project Supported by Higher Education Institutions, 2008 - 2010

Projects > Higher Education Institutions Supported Project

 

Investigation of the Fatigue Behavior of Dental Implants Made of Beta Titanium Alloys

Alsaran A. (Principal Investigator), Kahramanzade H., Hacısalihoğlu I.

Project Supported by Higher Education Institutions, 2012 - 2015

Projects > Higher Education Institutions Supported Project

 

SELF-STANDING SOLID OXIDE FUEL CELL INVOLVING A NOVEL REFORMING STRUCTURE FOR HYDROCARBON FUELS

Aydın Ö., Kitahara T.(Principal Investigator)

Project Supported by Public Institutions in Other Countries, 2017 - 2019

Projects > Supported by Public Institutions in Other Countries

 

Improving Fuel Cell Performance Using Plasma Synthetic Jet in PEM Fuel Cells

Akansu Y. E.(Principal Investigator)

TÜBİTAK Project, 2014 - 2016

TÜBİTAK Project > Projects

 

Cellular responses of osteoblast and fibroblast cell lines on oxidizing surface treated Ti6Al4V alloy

Bayrak Ö.(Executive), Kahramanzade H., Ak Can A.

Project Supported by Higher Education Institutions, 2018 - 2019

Projects > Higher Education Institutions Supported Project

 

4D-EEG Project

Gürsel Ozmen N., Van Der Helm F.

7. Framework Programme Project, 2014 - 2017

Projects > 7. Framework Programme Project

 

Experimental Setup Design and Manufacturing

PÜRÇEK G.

Project Supported by Other Official Institutions, 2011 - 2012

Projects > Projects Supported by Other Official Institutions

 

Design of KOBE Turbine

GÜMÜŞEL L.

Project Supported by Other Official Institutions, 2005 - 2005

Projects > Projects Supported by Other Official Institutions

 

Packed Tower Design," sponsored by Norton Chemical Process Products ($10,000) September 1989 - December 1989.

HE'S THE SACKMAN.

Other International Fund Programs, 1989 - 1989

Projects > Other International Funding Programs

 

Design and Processing Characteristics of Novel Three Dimensional Fibrous Preforms for Composite Reinforcement Project Code MISAG NSF 14 The Scientific and Technical Research Council of Turkey TÜBİTAK National Science Foundation NSF 2004 2007 Karadeniz Technical University Department of Mechanical Engineering and Auburn University Department of Polymer and Fiber Engineering 115 Textile Building Auburn AL 36849 5327 U S A

Head H.

TÜBİTAK International Bilateral Cooperation Project, 2004 - 2007

TÜBİTAK International Bilateral Cooperation Project > Projects

 

Design and Manufacture of a System for Preventing Waste of Water in Drinking Water Quality and Collecting Rainwater

CORA Ö. N. (Principal Investigator)

Project Supported by Other Official Institutions, 2014 - 2015

Projects > Projects Supported by Other Official Institutions

 

Phase Change Agent Addition Battery Thermal Control System Production

Yazıcı M. Y.(Executive), Sağlam M.

TÜBİTAK Project, 2018 - 2020

TÜBİTAK Project > Projects

 

Thermodynamic Analysis of the Effectiveness of Different Types of PV Modules in Humid Air Conditions

BALİ T. (Executive)

TÜBİTAK Project, 2008 - 2009

TÜBİTAK Project > Projects

 

Production of nanostructured, high-strength and fully biocompatible alpha and beta type Ti and Ti alloys for implant production and commercialization of this process

PÜRÇEK G.

Project Supported by Other Official Institutions, 2012 - 2013

Projects > Projects Supported by Other Official Institutions

 

Design, Development and Construction of a New Automated Peanut Processing Facility

HE'S THE SACKMAN.

Other International Fund Programs, 1996 - 1998

Projects > Other International Funding Programs

 

Experimental Investigation of Heat Trnssphere and System Parameters in Boiling in Microchannel Flows

HUNTER M.

TÜBİTAK Project, 2013 - 2017

TÜBİTAK Project > Projects

 

Improvement of heat transfer in high viscosity fluids with addition of nanoparticles

BEEKEEPER M. E. (Executive), NAMLI L., KAN F. E.

Project Supported by Higher Education Institutions, 2022 - 2023

Projects > Higher Education Institutions Supported Project

 

Experimental investigation of the effect of various production parameters on important fuel properties of biodiesel produced from some regional vegetable oils

BİLGİN A. (Executive)

Project Supported by Higher Education Institutions, 2013 - 2014

Projects > Higher Education Institutions Supported Project

 

Coating of Aluminum-Based Alloys by Micro Arc Oxidation (MAO) Method and Investigation of Erosion Wear Behavior

ÖZTÜRK B. (Principal Investigator), GEDIKLİ H., SEZER R., ICIN K., KILIÇARSLAN Y. S.

Project Supported by Higher Education Institutions, 2018 - 2021 

Projects > Higher Education Institutions Supported Project

 

Investigation of heat transfer in flow through a cylinder placed behind a semi-cylindrical obstacle

DALOĞLU A. C. (Principal Investigator)

Project Supported by Higher Education Institutions, 2007 - 2018

Projects > Higher Education Institutions Supported Project

 

Investigation of the Effect of Zinc and/or Copper Doping on the Structural, Mechanical and Tribological Properties of Commercial Al-7Si and Al-12Si Alloys

ALEMDAĞ Y. (Principal Investigator)

Project Supported by Higher Education Institutions, 2012 - 2016

Projects > Higher Education Institutions Supported Project

 

Hydrogen Powered Vehicle Design and Manufacturing

HEAD H. (Executive)

Project Supported by Higher Education Institutions, 2008 - 2008

Projects > Higher Education Institutions Supported Project

 

Design of a multi-robot system that transports objects of different geometries without grippers and development of a task sharing algorithm

GÜRSEL ÖZMEN N. (Principal Investigator)

Project Supported by Higher Education Institutions, 2013 - 2015

Projects > Higher Education Institutions Supported Project

 

DYNAMIC PROTECTION SYSTEM OUTSIDE THE BUILDING

CORA Ö. N. (Principal Investigator), AKSOY A.

Project Supported by Higher Education Institutions, 2019 - 2020

Projects > Higher Education Institutions Supported Project

 

Production with Ultracrystalline Structure and High Strength IF-Steel by Co-Channel Angular Extrusion Method

PÜRÇEK G. (Principal Investigator)

Project Supported by Higher Education Institutions, 2009 - 2012

Projects > Higher Education Institutions Supported Project

 

Forging Function Tribology Test Setup Design and Manufacturing

KÜÇÜKÖMEROĞLU T. (Principal Investigator), SERT Y., EMİR L. T., DEMİROK A. S.

Project Supported by Higher Education Institutions, 2019 - 2021

Projects > Higher Education Institutions Supported Project

 

Investigation of UAV Characteristics at High Altitude, Meteorological Investigations and Forecasting with Unmanned Aerial Vehicle

Öztürk N. B. (Principal Investigator), Karaman D., Mısır B.

TÜBİTAK Project, 2022 - 2024

TÜBİTAK Project > Projects

 

Comparison of Ion Concentrations in Extracted Milk Molar Teeth of Pediatric Patients Using Asthma Medication and Healthy Children

TÜZÜNER T. (Principal Investigator), DOĞRU Y., YILMAZ N., ALEMDAĞ Y., ALP İ.

Project Supported by Higher Education Institutions, 2022 - 2022

Projects > Higher Education Institutions Supported Project

 

Development of an Image-Based Non-Contact Object Search and Distribution System Using Leading Follower Pattern Control for Multiple Robots

GÜRSEL ÖZMEN N. (Principal Investigator), WEAVER H. İ.

Project Supported by Higher Education Institutions, 2022 - 2023

Projects > Higher Education Institutions Supported Project

 

Investigation of the Effect of Blowing from Fluid Object Around Permeable Surface Objects on Flow and Heat Transfer

ÇUHADAROĞLU B. (Principal Investigator)

Project Supported by Higher Education Institutions, 2009 - 2012

Projects > Higher Education Institutions Supported Project

 

Treatment of Wastewater by Distillation with Concentrated Solar Energy

DEMİRTAŞ C. (Principal Investigator), DEMİRCİ V.

Project Supported by Higher Education Institutions, 2019 - 2021

Projects > Higher Education Institutions Supported Project

 

Extruder capable of continuous fiber-reinforced composite printing in 3D Printers

ŞİMŞEK C. (Executive), CUSTOMS R., UŞUN A.

Project Supported by Higher Education Institutions, 2019 - 2021

Projects > Higher Education Institutions Supported Project

 

Experimental and Numerical Investigation of Macro and Micro Damage Behavior in Composite Structures

GEDIKLI H. (Principal Investigator), ÖZEN İ.

Project Supported by Higher Education Institutions, 2019 - 2022

Projects > Higher Education Institutions Supported Project